The hydraulic pressure testing machine for welded steel pipes of a pipeline factory aims to reduce the delay in finishing the pipe during the test phase. In order to comply with specific specifications, the test hold time will vary depending on the pipe being tested. Since 1911, Fives has relied on the Taylor-Wilson brand to focus on thehydraulic test machine engineering of welded steel pipes . There are now more than 49 moisture testers, leak detectors and fracture testers supplied worldwide.

The test of the hydraulic pressure testing machine for the welded steel pipe supplied to the Düsseldorf plant in Germany exceeded the API level specification, and it can test Cr13 pipes at a temperature of more than 1250 bar (18,130 PSI). Up to 406.4 mm (16 ") in diameter, 50 mm (1.97") heavy wall thickness, and an ultimate load of 8944 kN (2010620 lb), these are the specifications that Fives has produced to date.

This high-skilled equipment is satisfied with the small batch processing, which also ensures good quality, and is sensitive and easy to operate: the equipment is convenient to maintain and can quickly change tools

With the increasing depth and difficulty of global oil extraction, the requirements for drilling equipment are constantly changing. In order to address this demand, the American Petroleum Institute (API) has been seeking corresponding solutions to the problem of alternating pressure in extraction. Taylor-Wilson hydraulic pressure testing machine for welded steel pipes is the first batch of API approved and recommended equipment to solve related problems.

Taylor-Wilson equipment can measure the outer diameter of the pipe, as small as 25mm and as large as 660mm. It can be used for various types of pipe testing such as: flat end or square cut, API line pipe interface, thread connection interface, sharpening saw Or puncture the interface.